Description
McDanel 99.8% alumina insulators are used in demanding applications where purity and performance are critical in a variety of platinum and non-platinum based sensors.
Round Four Bore Tube Alumina 99.8%
Item #
N/A
Category:
Tubes & Rods > Round Four Bore > 99.8% Alumina
Share:
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.005 |
| Inside Diameter (mm) | 0.13 |
| Length Range (in) | 4.000-6.875 |
| Length Range (mm) | 101.60-174.63 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.031 |
| Outside Diameter (mm) | 0.79 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.005 |
| Inside Diameter (mm) | 0.13 |
| Length Range (in) | 6.876-12.875 |
| Length Range (mm) | 174.64-327.03 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.031 |
| Outside Diameter (mm) | 0.79 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.005 |
| Inside Diameter (mm) | 0.13 |
| Length Range (in) | 12.876-18.875 |
| Length Range (mm) | 327.04-479.43 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.031 |
| Outside Diameter (mm) | 0.79 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.005 |
| Inside Diameter (mm) | 0.13 |
| Length Range (in) | 18.876-24.875 |
| Length Range (mm) | 479.44-631.83 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.031 |
| Outside Diameter (mm) | 0.79 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.01 |
| Inside Diameter (mm) | 0.25 |
| Length Range (in) | 4.000-6.875 |
| Length Range (mm) | 101.60-174.63 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.047 |
| Outside Diameter (mm) | 1.19 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.01 |
| Inside Diameter (mm) | 0.25 |
| Length Range (in) | 6.876-12.875 |
| Length Range (mm) | 174.64-327.03 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.047 |
| Outside Diameter (mm) | 1.19 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.01 |
| Inside Diameter (mm) | 0.25 |
| Length Range (in) | 12.876-18.875 |
| Length Range (mm) | 327.04-479.43 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.047 |
| Outside Diameter (mm) | 1.19 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.01 |
| Inside Diameter (mm) | 0.25 |
| Length Range (in) | 18.876-24.875 |
| Length Range (mm) | 479.44-631.83 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.047 |
| Outside Diameter (mm) | 1.19 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.01 |
| Inside Diameter (mm) | 0.25 |
| Length Range (in) | 24.876-30.875 |
| Length Range (mm) | 631.84-784.23 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.047 |
| Outside Diameter (mm) | 1.19 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.016 |
| Inside Diameter (mm) | 0.41 |
| Length Range (in) | 4.000-6.875 |
| Length Range (mm) | 101.60-174.63 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.062 |
| Outside Diameter (mm) | 1.57 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.016 |
| Inside Diameter (mm) | 0.41 |
| Length Range (in) | 6.876-12.875 |
| Length Range (mm) | 174.64-327.03 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.062 |
| Outside Diameter (mm) | 1.57 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.016 |
| Inside Diameter (mm) | 0.41 |
| Length Range (in) | 12.876-18.875 |
| Length Range (mm) | 327.04-479.43 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.062 |
| Outside Diameter (mm) | 1.57 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.016 |
| Inside Diameter (mm) | 0.41 |
| Length Range (in) | 18.876-24.875 |
| Length Range (mm) | 479.44-631.83 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.062 |
| Outside Diameter (mm) | 1.57 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.016 |
| Inside Diameter (mm) | 0.41 |
| Length Range (in) | 24.876-30.875 |
| Length Range (mm) | 631.84-784.23 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.062 |
| Outside Diameter (mm) | 1.57 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.016 |
| Inside Diameter (mm) | 0.41 |
| Length Range (in) | 30.876-36.875 |
| Length Range (mm) | 784.24-936.63 |
| Outside Diameter Tolerance +/- (in) | 0.003 |
| Outside Diameter Tolerance +/- (mm) | 0.08 |
| Outside Diameter (in) | 0.062 |
| Outside Diameter (mm) | 1.57 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.02 |
| Inside Diameter (mm) | 0.51 |
| Length Range (in) | 4.000-6.875 |
| Length Range (mm) | 101.60-174.63 |
| Outside Diameter Tolerance +/- (in) | 0.005 |
| Outside Diameter Tolerance +/- (mm) | 0.13 |
| Outside Diameter (in) | 0.094 |
| Outside Diameter (mm) | 2.39 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.02 |
| Inside Diameter (mm) | 0.51 |
| Length Range (in) | 6.876-12.875 |
| Length Range (mm) | 174.64-327.03 |
| Outside Diameter Tolerance +/- (in) | 0.005 |
| Outside Diameter Tolerance +/- (mm) | 0.13 |
| Outside Diameter (in) | 0.094 |
| Outside Diameter (mm) | 2.39 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.02 |
| Inside Diameter (mm) | 0.51 |
| Length Range (in) | 12.876-18.875 |
| Length Range (mm) | 327.04-479.43 |
| Outside Diameter Tolerance +/- (in) | 0.005 |
| Outside Diameter Tolerance +/- (mm) | 0.13 |
| Outside Diameter (in) | 0.094 |
| Outside Diameter (mm) | 2.39 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.02 |
| Inside Diameter (mm) | 0.51 |
| Length Range (in) | 18.876-24.875 |
| Length Range (mm) | 479.44-631.83 |
| Outside Diameter Tolerance +/- (in) | 0.005 |
| Outside Diameter Tolerance +/- (mm) | 0.13 |
| Outside Diameter (in) | 0.094 |
| Outside Diameter (mm) | 2.39 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.02 |
| Inside Diameter (mm) | 0.51 |
| Length Range (in) | 24.876-30.875 |
| Length Range (mm) | 631.84-784.23 |
| Outside Diameter Tolerance +/- (in) | 0.005 |
| Outside Diameter Tolerance +/- (mm) | 0.13 |
| Outside Diameter (in) | 0.094 |
| Outside Diameter (mm) | 2.39 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.02 |
| Inside Diameter (mm) | 0.51 |
| Length Range (in) | 30.876-36.875 |
| Length Range (mm) | 784.24-936.63 |
| Outside Diameter Tolerance +/- (in) | 0.005 |
| Outside Diameter Tolerance +/- (mm) | 0.13 |
| Outside Diameter (in) | 0.094 |
| Outside Diameter (mm) | 2.39 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.02 |
| Inside Diameter (mm) | 0.51 |
| Length Range (in) | 4.000-6.875 |
| Length Range (mm) | 101.60-174.63 |
| Outside Diameter Tolerance +/- (in) | 0.006 |
| Outside Diameter Tolerance +/- (mm) | 0.15 |
| Outside Diameter (in) | 0.125 |
| Outside Diameter (mm) | 3.18 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.02 |
| Inside Diameter (mm) | 0.51 |
| Length Range (in) | 6.876-12.875 |
| Length Range (mm) | 174.64-327.03 |
| Outside Diameter Tolerance +/- (in) | 0.006 |
| Outside Diameter Tolerance +/- (mm) | 0.15 |
| Outside Diameter (in) | 0.125 |
| Outside Diameter (mm) | 3.18 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.02 |
| Inside Diameter (mm) | 0.51 |
| Length Range (in) | 12.876-18.875 |
| Length Range (mm) | 327.04-479.43 |
| Outside Diameter Tolerance +/- (in) | 0.006 |
| Outside Diameter Tolerance +/- (mm) | 0.15 |
| Outside Diameter (in) | 0.125 |
| Outside Diameter (mm) | 3.18 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.02 |
| Inside Diameter (mm) | 0.51 |
| Length Range (in) | 18.876-24.875 |
| Length Range (mm) | 479.44-631.83 |
| Outside Diameter Tolerance +/- (in) | 0.006 |
| Outside Diameter Tolerance +/- (mm) | 0.15 |
| Outside Diameter (in) | 0.125 |
| Outside Diameter (mm) | 3.18 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.02 |
| Inside Diameter (mm) | 0.51 |
| Length Range (in) | 24.876-30.875 |
| Length Range (mm) | 631.84-784.23 |
| Outside Diameter Tolerance +/- (in) | 0.006 |
| Outside Diameter Tolerance +/- (mm) | 0.15 |
| Outside Diameter (in) | 0.125 |
| Outside Diameter (mm) | 3.18 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.02 |
| Inside Diameter (mm) | 0.51 |
| Length Range (in) | 30.876-36.875 |
| Length Range (mm) | 784.24-936.63 |
| Outside Diameter Tolerance +/- (in) | 0.006 |
| Outside Diameter Tolerance +/- (mm) | 0.15 |
| Outside Diameter (in) | 0.125 |
| Outside Diameter (mm) | 3.18 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 4.000-6.875 |
| Length Range (mm) | 101.60-174.63 |
| Outside Diameter Tolerance +/- (in) | 0.008 |
| Outside Diameter Tolerance +/- (mm) | 0.2 |
| Outside Diameter (in) | 0.156 |
| Outside Diameter (mm) | 3.96 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 6.876-12.875 |
| Length Range (mm) | 174.64-327.03 |
| Outside Diameter Tolerance +/- (in) | 0.008 |
| Outside Diameter Tolerance +/- (mm) | 0.2 |
| Outside Diameter (in) | 0.156 |
| Outside Diameter (mm) | 3.96 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 12.876-18.875 |
| Length Range (mm) | 327.04-479.43 |
| Outside Diameter Tolerance +/- (in) | 0.008 |
| Outside Diameter Tolerance +/- (mm) | 0.2 |
| Outside Diameter (in) | 0.156 |
| Outside Diameter (mm) | 3.96 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 18.876-24.875 |
| Length Range (mm) | 479.44-631.83 |
| Outside Diameter Tolerance +/- (in) | 0.008 |
| Outside Diameter Tolerance +/- (mm) | 0.2 |
| Outside Diameter (in) | 0.156 |
| Outside Diameter (mm) | 3.96 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 24.876-30.875 |
| Length Range (mm) | 631.84-784.23 |
| Outside Diameter Tolerance +/- (in) | 0.008 |
| Outside Diameter Tolerance +/- (mm) | 0.2 |
| Outside Diameter (in) | 0.156 |
| Outside Diameter (mm) | 3.96 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 30.876-36.875 |
| Length Range (mm) | 784.24-936.63 |
| Outside Diameter Tolerance +/- (in) | 0.008 |
| Outside Diameter Tolerance +/- (mm) | 0.2 |
| Outside Diameter (in) | 0.156 |
| Outside Diameter (mm) | 3.96 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 36.876-42.875 |
| Length Range (mm) | 936.64-1089.03 |
| Outside Diameter Tolerance +/- (in) | 0.008 |
| Outside Diameter Tolerance +/- (mm) | 0.2 |
| Outside Diameter (in) | 0.156 |
| Outside Diameter (mm) | 3.96 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 42.876-48.875 |
| Length Range (mm) | 1089.04-1241.43 |
| Outside Diameter Tolerance +/- (in) | 0.008 |
| Outside Diameter Tolerance +/- (mm) | 0.2 |
| Outside Diameter (in) | 0.156 |
| Outside Diameter (mm) | 3.96 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 4.000-6.875 |
| Length Range (mm) | 101.60-174.63 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 6.876-12.875 |
| Length Range (mm) | 174.64-327.03 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 12.876-18.875 |
| Length Range (mm) | 327.04-479.43 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 18.876-24.875 |
| Length Range (mm) | 479.44-631.83 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 24.876-30.875 |
| Length Range (mm) | 631.84-784.23 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 30.876-36.875 |
| Length Range (mm) | 784.24-936.63 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 36.876-42.875 |
| Length Range (mm) | 936.64-1089.03 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.031 |
| Inside Diameter (mm) | 0.79 |
| Length Range (in) | 42.876-48.875 |
| Length Range (mm) | 1089.04-1241.43 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.047 |
| Inside Diameter (mm) | 1.19 |
| Length Range (in) | 4.000-6.875 |
| Length Range (mm) | 101.60-174.63 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.047 |
| Inside Diameter (mm) | 1.19 |
| Length Range (in) | 6.876-12.875 |
| Length Range (mm) | 174.64-327.03 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.047 |
| Inside Diameter (mm) | 1.19 |
| Length Range (in) | 12.876-18.875 |
| Length Range (mm) | 327.04-479.43 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.047 |
| Inside Diameter (mm) | 1.19 |
| Length Range (in) | 18.876-24.875 |
| Length Range (mm) | 479.44-631.83 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.047 |
| Inside Diameter (mm) | 1.19 |
| Length Range (in) | 24.876-30.875 |
| Length Range (mm) | 631.84-784.23 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.047 |
| Inside Diameter (mm) | 1.19 |
| Length Range (in) | 30.876-36.875 |
| Length Range (mm) | 784.24-936.63 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.047 |
| Inside Diameter (mm) | 1.19 |
| Length Range (in) | 36.876-42.875 |
| Length Range (mm) | 936.64-1089.03 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.047 |
| Inside Diameter (mm) | 1.19 |
| Length Range (in) | 42.876-48.875 |
| Length Range (mm) | 1089.04-1241.43 |
| Outside Diameter Tolerance +/- (in) | 0.009 |
| Outside Diameter Tolerance +/- (mm) | 0.23 |
| Outside Diameter (in) | 0.187 |
| Outside Diameter (mm) | 4.75 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.05 |
| Inside Diameter (mm) | 1.27 |
| Length Range (in) | 4.000-6.875 |
| Length Range (mm) | 101.60-174.63 |
| Outside Diameter Tolerance +/- (in) | 0.011 |
| Outside Diameter Tolerance +/- (mm) | 0.28 |
| Outside Diameter (in) | 0.218 |
| Outside Diameter (mm) | 5.54 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.05 |
| Inside Diameter (mm) | 1.27 |
| Length Range (in) | 6.876-12.875 |
| Length Range (mm) | 174.64-327.03 |
| Outside Diameter Tolerance +/- (in) | 0.011 |
| Outside Diameter Tolerance +/- (mm) | 0.28 |
| Outside Diameter (in) | 0.218 |
| Outside Diameter (mm) | 5.54 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.05 |
| Inside Diameter (mm) | 1.27 |
| Length Range (in) | 12.876-18.875 |
| Length Range (mm) | 327.04-479.43 |
| Outside Diameter Tolerance +/- (in) | 0.011 |
| Outside Diameter Tolerance +/- (mm) | 0.28 |
| Outside Diameter (in) | 0.218 |
| Outside Diameter (mm) | 5.54 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.05 |
| Inside Diameter (mm) | 1.27 |
| Length Range (in) | 18.876-24.875 |
| Length Range (mm) | 479.44-631.83 |
| Outside Diameter Tolerance +/- (in) | 0.011 |
| Outside Diameter Tolerance +/- (mm) | 0.28 |
| Outside Diameter (in) | 0.218 |
| Outside Diameter (mm) | 5.54 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.05 |
| Inside Diameter (mm) | 1.27 |
| Length Range (in) | 24.876-30.875 |
| Length Range (mm) | 631.84-784.23 |
| Outside Diameter Tolerance +/- (in) | 0.011 |
| Outside Diameter Tolerance +/- (mm) | 0.28 |
| Outside Diameter (in) | 0.218 |
| Outside Diameter (mm) | 5.54 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.05 |
| Inside Diameter (mm) | 1.27 |
| Length Range (in) | 30.876-36.875 |
| Length Range (mm) | 784.24-936.63 |
| Outside Diameter Tolerance +/- (in) | 0.011 |
| Outside Diameter Tolerance +/- (mm) | 0.28 |
| Outside Diameter (in) | 0.218 |
| Outside Diameter (mm) | 5.54 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.05 |
| Inside Diameter (mm) | 1.27 |
| Length Range (in) | 36.876-42.875 |
| Length Range (mm) | 936.64-1089.03 |
| Outside Diameter Tolerance +/- (in) | 0.011 |
| Outside Diameter Tolerance +/- (mm) | 0.28 |
| Outside Diameter (in) | 0.218 |
| Outside Diameter (mm) | 5.54 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.05 |
| Inside Diameter (mm) | 1.27 |
| Length Range (in) | 42.876-48.875 |
| Length Range (mm) | 1089.04-1241.43 |
| Outside Diameter Tolerance +/- (in) | 0.011 |
| Outside Diameter Tolerance +/- (mm) | 0.28 |
| Outside Diameter (in) | 0.218 |
| Outside Diameter (mm) | 5.54 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.062 |
| Inside Diameter (mm) | 1.57 |
| Length Range (in) | 4.000-6.875 |
| Length Range (mm) | 101.60-174.63 |
| Outside Diameter Tolerance +/- (in) | 0.013 |
| Outside Diameter Tolerance +/- (mm) | 0.33 |
| Outside Diameter (in) | 0.25 |
| Outside Diameter (mm) | 6.35 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.062 |
| Inside Diameter (mm) | 1.57 |
| Length Range (in) | 6.876-12.875 |
| Length Range (mm) | 174.64-327.03 |
| Outside Diameter Tolerance +/- (in) | 0.013 |
| Outside Diameter Tolerance +/- (mm) | 0.33 |
| Outside Diameter (in) | 0.25 |
| Outside Diameter (mm) | 6.35 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.062 |
| Inside Diameter (mm) | 1.57 |
| Length Range (in) | 12.876-18.875 |
| Length Range (mm) | 327.04-479.43 |
| Outside Diameter Tolerance +/- (in) | 0.013 |
| Outside Diameter Tolerance +/- (mm) | 0.33 |
| Outside Diameter (in) | 0.25 |
| Outside Diameter (mm) | 6.35 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.062 |
| Inside Diameter (mm) | 1.57 |
| Length Range (in) | 18.876-24.875 |
| Length Range (mm) | 479.44-631.83 |
| Outside Diameter Tolerance +/- (in) | 0.013 |
| Outside Diameter Tolerance +/- (mm) | 0.33 |
| Outside Diameter (in) | 0.25 |
| Outside Diameter (mm) | 6.35 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.062 |
| Inside Diameter (mm) | 1.57 |
| Length Range (in) | 24.876-30.875 |
| Length Range (mm) | 631.84-784.23 |
| Outside Diameter Tolerance +/- (in) | 0.013 |
| Outside Diameter Tolerance +/- (mm) | 0.33 |
| Outside Diameter (in) | 0.25 |
| Outside Diameter (mm) | 6.35 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.062 |
| Inside Diameter (mm) | 1.57 |
| Length Range (in) | 30.876-36.875 |
| Length Range (mm) | 784.24-936.63 |
| Outside Diameter Tolerance +/- (in) | 0.013 |
| Outside Diameter Tolerance +/- (mm) | 0.33 |
| Outside Diameter (in) | 0.25 |
| Outside Diameter (mm) | 6.35 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.062 |
| Inside Diameter (mm) | 1.57 |
| Length Range (in) | 36.876-42.875 |
| Length Range (mm) | 936.64-1089.03 |
| Outside Diameter Tolerance +/- (in) | 0.013 |
| Outside Diameter Tolerance +/- (mm) | 0.33 |
| Outside Diameter (in) | 0.25 |
| Outside Diameter (mm) | 6.35 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.062 |
| Inside Diameter (mm) | 1.57 |
| Length Range (in) | 42.876-48.875 |
| Length Range (mm) | 1089.04-1241.43 |
| Outside Diameter Tolerance +/- (in) | 0.013 |
| Outside Diameter Tolerance +/- (mm) | 0.33 |
| Outside Diameter (in) | 0.25 |
| Outside Diameter (mm) | 6.35 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.062 |
| Inside Diameter (mm) | 1.57 |
| Length Range (in) | 4.000-6.875 |
| Length Range (mm) | 101.60-174.63 |
| Outside Diameter Tolerance +/- (in) | 0.016 |
| Outside Diameter Tolerance +/- (mm) | 0.41 |
| Outside Diameter (in) | 0.312 |
| Outside Diameter (mm) | 7.92 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.062 |
| Inside Diameter (mm) | 1.57 |
| Length Range (in) | 6.876-12.875 |
| Length Range (mm) | 174.64-327.03 |
| Outside Diameter Tolerance +/- (in) | 0.016 |
| Outside Diameter Tolerance +/- (mm) | 0.41 |
| Outside Diameter (in) | 0.312 |
| Outside Diameter (mm) | 7.92 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.062 |
| Inside Diameter (mm) | 1.57 |
| Length Range (in) | 12.876-18.875 |
| Length Range (mm) | 327.04-479.43 |
| Outside Diameter Tolerance +/- (in) | 0.016 |
| Outside Diameter Tolerance +/- (mm) | 0.41 |
| Outside Diameter (in) | 0.312 |
| Outside Diameter (mm) | 7.92 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.062 |
| Inside Diameter (mm) | 1.57 |
| Length Range (in) | 18.876-24.875 |
| Length Range (mm) | 479.44-631.83 |
| Outside Diameter Tolerance +/- (in) | 0.016 |
| Outside Diameter Tolerance +/- (mm) | 0.41 |
| Outside Diameter (in) | 0.312 |
| Outside Diameter (mm) | 7.92 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.062 |
| Inside Diameter (mm) | 1.57 |
| Length Range (in) | 24.876-30.875 |
| Length Range (mm) | 631.84-784.23 |
| Outside Diameter Tolerance +/- (in) | 0.016 |
| Outside Diameter Tolerance +/- (mm) | 0.41 |
| Outside Diameter (in) | 0.312 |
| Outside Diameter (mm) | 7.92 |
| SDS Sheet | Open |
| Property Sheet | Open |
| Inside Diameter Tolerance +/- (in) | 0.003 |
|---|---|
| Inside Diameter Tolerance +/- (mm) | 0.08 |
| Inside Diameter (in) | 0.062 |
| Inside Diameter (mm) | 1.57 |
| Length Range (in) | 30.876-36.875 |
| Length Range (mm) | 784.24-936.63 |
| Outside Diameter Tolerance +/- (in) | 0.016 |
| Outside Diameter Tolerance +/- (mm) | 0.41 |
| Outside Diameter (in) | 0.312 |
| Outside Diameter (mm) | 7.92 |
| SDS Sheet | Open |
| Property Sheet | Open |
